姓名：謝政道Cheng-Tiao Hsieh
職稱：助理教授
學歷：美國Rutgers University機械暨航太工程博士
專長：快速成型、逆向工程、CAD/CAM/CAE、系統與控制、電腦繪圖
E-Mail：cthsieh@mail.mcut.edu.tw
聯絡電話：02-29089899#3216
一、期刊論文
1. Cheng-Tiao Hsieh, Yu-Long Yao , “Finding Optimal Scanning Height and Speed for a Prusa-i3 Based Laser Carving System”, 工業設計, 第45卷, 第二期, pp 20-23, July 2017
2. Cheng-Tiao Hsieh, “Investigation of Delta Robot 3D Printer for a Good Quality of Printing”, Applied Mechanics and Materials, Vol 870, pp164~169, Sept. 2017 (EI)
3. Cheng-Tiao Hsieh, “Development of an Integrated System of 3D Printer and Laser Carving”, IEEE Xpolre, 2016 (EI)
4. Cheng-Tiao Hsieh, “Detecting Object Edges by Xtion Pro and Open Sources”, Lecture Notes in Electrical Engineering 345, 2016 (EI)
5. Cheng-Tiao Hsieh, “A new Kinect-based scanning system and its application”, Applied Mechanics and Materials Vols. 764-765 pp1376-1379, 2015 (EI)
6. Cheng-Tiao Hsieh, “An Efficient Scanning Approach for Multiple Targets”, Lecture Notes in Electrical Engineering 293, Springer, pp991~998, 2014 (EI)
7. Cheng-Tiao Hsieh, “The Development of Estimating Deviations Directly from Point Clouds”, Lecture Notes in Electrical Engineering 234, Springer, pp169~177, 2013 (EI)
8. Cheng-Tiao Hsieh, “An efficient development of 3D surface registration by Point Cloud Library (PCL)”, IEEE Xplore, 2013 (EI)
9. 謝政道, “運用RAPIDFORM快速建構臉型比對平台”, 工業設計, 第37卷, 第二期, pp 229-232, November, 2009, (NSC-98-2622-E-131-027-CC3.)
10. Shu-Chin Chien, Chih-Ping Chen, Chyi-Chyang Lin, Li-Chia Huang, Cheng-Tiao Hsieh, Fuu-Jen Tsai, “Prenatal Diagnosis of mos45,X/46,+mar in A Fetus with Normal Male External Genitalia and a Literature Review”, Taiwan J Obstet Gynecol, Vol 48 No3 pp292-295, September 2009
11. 謝政道, “簡化數位雕刻平台之網格模型”, 工業設計, 第36卷, 第二期, pp 215-218, November, 2008 (NSC95-2221-E-131-026)
二、 專書及專書論文
1. Cheng-Tiao Hsieh, May, 2002, “PC Based Multi-material Integrated CAD System for Layered Manufacturing”, Ph.D Dissertation, The State University of New Jersey – Rutgers
三、 研討會論文
1. 廖崧甫、謝政道, “經濟型線性雷射3D掃描機之自製組裝與校正”， 2018明志科技大學技術與教學研討會, 新北市，Nov. 30 2018
2. Cheng-Tiao Hsieh, “Developing Low Cost and Smart Laser-based Paper Cutter based on Open Source 3D Printer”, 2018 IEEE International Conference on Advanced Manufacturing, Taiwan, November 16~18, 2018
3. 謝政道，“建構逆向設計人才培育課程初探”，明志科技大學第一屆教學創新實踐研討會，March 16, 2018
4. 謝政道，“產品專題設計課程以創新創業課程導向之實踐”，明志科技大學第一屆教學創新實踐研討會，March 16, 2018
5. Cheng-Tiao Hsieh, “Development of a Single-nozzle-based FDM Printer for Multi-material Printing”, The Fifth International Multi-Conference on Engineering and Technology Innovation 2017 (IMETI2017), October 27-October 31, 2017, Taiwan
6. Yu-Long Yao, Cheng-Tiao Hsieh, “Development of 3DDLP Printer Based on Open Source”, 2017GCIDC 世界華人工業設計論壇, New Taipei City, Taiwan, Nov. 22 2017
7. Cheng-Tiao Hsieh, “Development of an Integrated System of 3D Printer and Laser Carving”, International Microsystems, Packaging, Assembly and Circuits Technology conference, Oct. 26~28 2016, Taipei, Taiwan, 2016
8. Cheng-Tiao Hsieh, Yu-Long Yao , “Finding Optimal Scanning Height and Speed for a Prusa-i3 Based Laser Carving System”, 2016明志科技大學技術與教學研討會, Nov. 25, 新北市，台灣 2016
9. Cheng-Tiao Hsieh, “Investigation of Delta Robot 3D Printer for a Good Quality of Printing”, 12th International Symposium on Measurement Technology and Intelligent Instrument, Sept. 22~25 2015, Taipei, Taiwan 2015
10. Cheng-Tiao Hsieh, “Development of an Interface between 3D Kinect Scanner and Kossel Mini Printer”, International Multi-conference on Engineering and Technology Innovation 2015, Oct. 30~Nov. 3 2015, Kaosjung, Taiwan, 2015
11. Cheng-Tiao Hsieh, “Detecting object edges by Xtion pro and open sources”, Proceedings of the 3rd International Conference on Intelligent technologies and Engineering Systems, Dec. 2014, Kaosiung, Taiwan, 2014
12. Cheng-Tiao Hsieh, “A new Kinect-based scanning system and its application”, 2014 International Conference on Engineering and Technology Innovation, Kenting, Taiwan, Oct. 31~ Nov. 04 2014.
13. Cheng-Tiao Hsieh, “An Efficient Scanning Approach for Multiple Targets”, the 2nd International Conference on Intelligent Technologies and Engineering System, Dec. 12-14, 2013. Kaosiung, Taiwan.
14. Cheng-Tiao Hsieh, “Extracting a scanned target from raw scanned data set produced by Kinect-based 3D scanner”, 2013 International conference on Applied Technology, Sun Moon Lake, Nanton, Taiwan, Oct. 18-22, 2013
15. Cheng-Tiao Hsieh, “An efficient development of 3D surface registration by Point Cloud Library (PCL)”, IEEE international Symposium on intelligent Signal processing and Communication Systems, Fullon Hotel, Tamsui, new Taipei City, Taiwan, Nov. 4-7, 2012
16. Cheng-Tiao Hsieh, “The Development of Estimating Deviations Directly from Point Clouds”, Proceedings of the 1st International conference on Intelligent technologies and Engineering Systems, Changhua, Taiwan, December 13-15, 2012
17. Cheng-Tiao Hsieh, “A Novel Remote Interface for Controlling and Monitoring Rapid Prototyping Systems via The Internet”, The 11th International Conference on Automation Technology, National Yunlin University of Science and Technology, Yunlin, Taiwan, November 18-20, 2011.
18. Cheng-Tiao Hsieh, “Development of an Intuitive 3D Modeling System for Particle-based Model”, International Conference on Manufacturing and Engineering Systems (ICMES 2010), Southern Taiwan University of Technology, Tainan, Taiwan, December, 16~18, 2010.
19. Cheng-Tiao Hsieh, “Developing Digital Face Inspection Platform in VTK”, International Conference on Manufacturing and Engineering Systems (MES 2009), Page 488-493, National Formosa University, Taiwan, December 17, 19, 2009 (NSC-98-2622-E-131-027-CC3.)
20. 謝政道, “運用RAPIDFORM快速建構臉型比對平台”, 2009明志科技大學技術與教學研討會, 明志科技大學, November 20, 2009, (NSC-98-2622-E-131-027-CC3.)
21. Shu-Chin Chien, Cheng-Tiao Hsieh, Fuu-Jen Tsai, Chyi-Chyang Lin, “Postnatal detection of a de novo mosaic supernumerary marker chromosome 22”, 台灣婦產科醫學會98年度年會暨擴大學術研討會,台大醫院國際會議中心,Feb. 28~Mar. 01, 2009
22. Shu-Chin Chien, Cheng-Tiao Hsieh, Ming Ho, Chyi-Chyang Lin, Fuu-Jen Tsai, “Postnatal detection of a de novo satellite Yp from father carrying a satellite Xp as a possible result of an unstable translocation during Xp-Yp pairing”, 台灣婦產科醫學會98年度年會暨擴大學術研討會,台大醫院國際會議中心,Feb. 28~Mar. 01, 2009
23. 謝政道、周永燦, “平滑數位雕刻模型之階梯效應”, 中國工業工程學會2008學術研討會, 中原大學, December 13, 2008. (NSC95-2221-E-131-026)
24. 謝政道, “簡化數位雕刻平台之網格模型”, 2008明志科技大學技術與教學研討會, 明志科技大學, November 19, 2008 (NSC95-2221-E-131-026)
25. Shu-Chin Chien, Fuu-Jen Tsai, Chyi-Chyang Lin, Cheng-Tiao Hsieh, “Prenatal detection of a maternally inherited 9q32-q33.3 deletion in a female with cleft palate”, 台灣婦產科醫學會97年度年會暨擴大學術研討會,台大醫院國際會議中, March 15~16, 2008
26. Shu-Chin Chien, Chyi-Chyang Lin, Ming Ho, Fuu-Jen Tsai, Cheng-Tiao Hsieh, “Prenatal diagnosis of an XX male with the SRY gene on chromosome 3p”, 台灣婦產科醫學會97年度年會暨擴大學術研討會,台大醫院國際會議中心, March 15~16, 2008
27. Shu-Chin Chien, Chyi-Chyang Lin, Ming Ho, Fuu-Jen Tsai, Cheng-Tiao Hsieh, “Prenatal diagnosis of trisomy 8 mosaicism owing to a de novo isodicentric 8p”, 台灣婦產科醫學會97年度年會暨擴大學術研討會,台大醫院國際會議中心, March 15~16, 2008
28. 謝政道, “STL模型與體積模型轉換技術之軟體開發”, 2007明志科技大學技術與教學研討會, 明志科技大學, November 24, 2007 (NSC93-2212-E-148-001)
29. 謝政道, “STL模型之數位雕塑技術”, 中國機械工程學會第二十三屆全國學術研討會, 崑山科技大學, November 24~25, 2006 (NSC93-2212-E-148-001)
30. 謝政道, “STL模型的布林運算”, 中國工業工程學會2006學術研討會, 東海大學, December 23, 2006
31. 謝政道, “多材質STL模型層切法之改善研究”, 2005明志科技大學技術與教學研討會, 明志科技大學, November 19, 2005
32. Cheng-Tiao Hsieh, “3D Scanning System with Model Smoothing Function”, 中國機械工程學會第二十一屆全國學術研討會,Dec.26`27,高雄, 2004
33. Cheng-Tiao Hsieh and Noshir A. Langrana, “An Integrated Multi-material CAD System”, Proceedings of the 11th the World Congress in Machine Science, Dm40, August 18-21, 2003.
34. Cheng-Tiao Hsieh, Noshir A. Langrana and Kathryn B. Higgins, “Reverse Engineering issues in Fused Deposition of Multi-ceramic (FDMC) materials”, Solid Freeform Fabrication Symposium, University of Texas at Austin, August 2002.
35. Cheng-Tiao Hsieh and Noshir A. Langrana, “A System Approach in Extrusion Based Multi-material CAD”, Solid Freeform Fabrication Symposium, University of Texas at Austin, August 2001.
36. Noshir Langrana, Dan Qiu, Guohua Wu, Kathryn Higgins and Cheng Tiao Hsieh, Design, Simulation and SFF Techniques for Functional Components, ASME 2000 Design Engineering Technical Conferences, Baltimore, Maryland, September 2000.
四、 技術報告及其他
1. 謝政道, “經濟型3D列印機之開發與應用”, 107年度學界協助中小企業科技關懷計畫結案報告, 2018
2. 謝政道, “運用網路科技提升 CAE 技術服務”, 99年度學界協助中小企業科技關懷計畫結案報告, 2010
3. 謝政道, “三維臉型掃描系統之建置”, 98年度學界協助中小企業科技關懷計畫結案報告,2009
4. 謝政道, “Structured Lighting掃描系統之建置”, 明志科技大學教師實務研習報告, 2008
5. 謝政道, “有限元素法在體積模型形變之運用”, 國科會95年度專題計劃精簡報告
6. 謝政道, “台塑仁武廠學生宿舍之網路規劃與建置”, 明志科技大學教師實務研習報告, 2005
7. 謝政道, “數位雕刻技術在STL自由形變的運用”, 國科會93年度專題計劃精簡報告
8. Noshir A. Langrana, Cheng-Tiao Hsieh, Dan Qiu, Guo-hua Wu and Kathryn B. Higgins, September 2000, "Design Prototyping Applications", Book Chapter in Handbook of Rapid Prototyping and Layered Manufacturing: Technologies, Fundamentals and Applications, Editor in Chief Leu, M, Academic Press Series, accepted for publication.
五、 產學合作計畫及服務
1. “經濟型3D列印機之開發與應用 ” (計畫編號:20180330211923127) - 107年度學界協助中小企業科技關懷計畫，金屬中心 (結案 )
2. “建構智慧製造中心之前置作業”O01-106M061 - 106年度明志科技大學產學合作計畫, 揚恩科技
3. “3D列印與雷雕之整合開發” - 105年度學界協助中小企業科技關懷跨域整合計畫, 金屬中心 (結案)
4. “3D列印機之設計及建構” O01-104M052 - 104年度明志科技大學產學合作計畫, 駒鎧實業
5. “創意加速與產品實現服務群聚之相關文宣及FB粉絲團建置”O01-104M034 - 104年度明志科技大學產學合作計畫, 揚恩科技
6. “運用網路科技提升 CAE 技術服務 ” - 99年度學界協助中小企業科技關懷計 畫，金屬中心 (結案 )
7. “數位臉型檢視軟體之開發 ” – NSC98 -2622 -E-131 -027 ，國科會產學合作計畫 ，國科會產學合作計畫 (結案 )
8. “三維臉型掃描系統之建置 ”- PT097130680PT097130680 ，98 年度學界協助中小企業科技關 懷計畫，金屬中心 (結案 )
9. “數位雕刻技術在STL自由形變的運用”, 國科會93年度專題計畫
10. 獲聘創應技術服務股份有限公司無給職顧問，期自 獲聘創應技術服務股份有限公司無給職顧問，期自 獲聘創應技術服務股份有限公司無給職顧問，期自 民國97年九月~99年八月)